Built on HE technology from the Flatpack2 HE rectifier family, the Rectiverter provides backed up power with minimum losses and footprint.
Rectifier and inverter in one box.
The Rectiverter is a 3 port device capable of charging the 48V battery and simultaneously provides power for the AC and DC loads. During mains outage the Rectiverter feeds AC loads using energy stored in the battery.
| Technical data | |
| Output voltage | 48, 110, 220 VDC |
| Input voltage | værdi |
| Input frequency | værdi |
| Interface | værdi |
Reliable high efficiency rectifier for industrial applications.
Since the launch the Flatpack2 family has expanded into a wide selection of power ratings and voltages.
| Technical data | |
| Output voltage | 24, 30, 48, 60, 110, 125, 220, 380 VDC |
| Input voltage | 85-300 VAC - 85-300 VDC |
| Input frequency | 0-50 Hz |
| Power | 2 kW/module - 500 kW |
| Interface | SNMP, SMTP, Ethernet |
The Flatpack2 DC/DC converters add new flexibility to the Flatpack2 power systems. Secondary 24 Vdc or 48 Vdc outputs can be provided from the main voltage battery. Application requiring galvanic isolation between the loads can now also be addressed.
| Technical data | |
| Output voltage | 24, 30, 48, 60, 110, 125, 220, 380 VDC |
| Input voltage | 85-300 VAC - 85-300 VDC |
| Input frequency | 0-50 Hz |
| Power | 2 kW/module - 500 kW |
| Interface | SNMP, SMTP, Ethernet |
Full control at your fingertips! The new Smartpack2 Touch raw power with a touch of elegance.
New features and look on a well-tested control platform Eltek’s new Smartpack2 Touch controller offers much more than its delicately designed exterior suggests. It will be for power system managers what the smart phone is for people in general: so powerful and yet so simple to use it becomes an essential part of daily life.
The Smartpack2 Touch is the next generation controller, and its the only controller that you need. It supports all your equipment, Eltek, Delta or 3rd party, and it has the highest security rating
...and much more
The Integrated 19” 2U power supply is built around the Flatpack2 rectifier and designed for applications such as switchgear, telecom, emergency lighting and alarm systems.
Its compact design and simple installation make it a powerful 19” power supply package.
The rectifiers wide DC output range makes it suitable for parallel operation with all types of stationary batteries, including lead acid, or nickel cadmium types.
| Technical data | |
| Output spænding | 24, 48, 60, 110, 125 VDC |
| Input spænding | 85-275 VAC - 85-305 VDC |
| Input frequency | 0, 45-66 Hz |
| Power | 8 kW |
| Power | SNMP, SMTP, Ethernet |
The Flatpack2 Wallbox is built around our Flatpack2 rectifier.
Depending on the rectifier selected, the system DC output can be one of the following: 24V/40-168 A,48V/15-83 A, 110V/10-34A.
Its compact design and simple installation make it a powerful wall mounted DC power supply package.The rectifier’s wide DC output range makes it suitable for parallel operation with all types of stationary batteries, including lead acid,or nickel cadmium types.
| Technical data | |
| Output voltage | 24, 48, 60, 110, 125, 220 VDC |
| Input voltage | 85-300 VAC |
| Input frequency | 50 Hz |
| Power | 4 kW |
| Interface | SNMP, SMTP, Ethernet |
| IP rating | IP21 |
The Rectiverter 2U 19” Integrated System can be used as a standalone system with bulk AC & DC outputs in industrial applications.
The total output power for both AC and DC is limited to a total 8 kW. AC and DC output limits can be set according to the connected load, where the limitation for AC load is set to max 6 kVA and for DC load to max 4,8 kW.As additional options, the measuring and signaling can be widely extended with the I/O Monitor or Fleximonitor CAN nodes.
| Technical data | |
| Output voltage | 48, 110, 220,VDC & 230 VAC |
| Input voltage | 185-275 VAC , 43-58, 97-145, 194-290 VDC |
| Input frequency | 50 Hz |
| Power | 4,8 kW |
| Interface | SNMP, SMTP, Ethernet |